Skip to content
Buff & Bead

Ceramic Coatings and Protection

Adam's Graphene Ceramic Coating vs CarPro CQUARTZ UK 3.0

The longest durability claim in the category against the only coating that publishes its silica content. This is a comparison about what each maker is willing to put in writing.

By Sawyer V. · Last verified 2026-09-08

We have not tested any of this. Everything below is compiled from published manufacturer specifications, and the arithmetic is printed so you can check it. This page carries affiliate links: if you buy through one we earn a commission at no extra cost to you, and it does not change the order of the picks. Full disclosure.

Buy CQUARTZ UK 3.0. CarPro publishes 70% SiO2 at 99.9% purity, a 10ml per coat consumption figure and a 40F to 90F application window; Adam’s publishes a 7+ year claim and none of those. The decision flips if you want UV tracing while you apply, which Adam’s offers and CarPro does not.
#PickBest forScorePrice
1

CarPro CQUARTZ UK 3.0

CarPro

The only coating here that publishes its SiO2 percentage6.1/10Check price on Amazon
2

Adam's Graphene Ceramic Coating

Adam's Polishes

The biggest claim on the page, and the fullest kit6.0/10Check price on Amazon
Click any row to jump to the full write-up further down this page. The score is our arithmetic over published specifications, shown in full under each write-up.

No live price is currently verified, so every button here reads Check price rather than a number we cannot stand behind. Why we do it that way.

Two coating bottles standing side by side on a clean workbench in daylight

Side by side, on published figures only

CarPro CQUARTZ UK 3.0Adam's Graphene Ceramic Coating
Bottle size30ml (also 10 / 50 / 100ml)60ml
List price$59.99 for the 30ml kit$119.99
Claimed durability2 to 5 years7+ years
Published SiO270% at 99.9% purityNot published
Claimed hardnessNot publishedGreater than 10H
Consumption10ml per coatNot published
Application temperature40F to 90FNot published
CureNot published24 hours free from water
In the boxBottle, 4 suede applicators, block, leveling towelBottle, Graphene Boost, Surface Prep, 4 towels, 2 applicators, gloves
Every figure taken from each manufacturer's own product page on 8 September 2026. Blank cells are figures the maker does not publish.

Where CQUARTZ wins

On checkability, comprehensively. CarPro tells you what is in the bottle, how much of it a coat uses, and the temperature range in which it will behave. Those three numbers let you answer the questions people actually have before buying a coating: is this the same chemistry as the cheaper one, how many cars will it do, and can I apply it in my garage in November.

The consumption figure in particular does real work. Ten milliliters per coat means the 30ml bottle is three coats, which is one car with a spare or a small car twice. That is a purchase you can plan. Adam’s 60ml bottle might do four cars or one; the product page does not say, and the accompanying claim of seven-plus years makes the omission more conspicuous rather than less.

The price comparison is closer than it looks

$59.99 for 30ml against $119.99 for 60ml is the same price per milliliter. The Adam’s kit includes surface prep and a booster that CarPro does not, and the CarPro kit includes more applicators and a proper suede leveling towel. Neither is obviously better value; they are the same money packaged differently.

Where Adam's wins

Three genuine things. The kit is more complete: 4oz of Surface Prep in the box means the panel wipe step, which is the one people skip and the one that causes early failures, is not a separate purchase. The Graphene Boost extends the coating without a second trip to the store. And the optional UV flashlight makes high spots visible while they are still fixable, which on dark paint is worth more than most specifications on this page.

There is also the plain matter of the claim. Seven-plus years is an enormous number and it is not impossible; the honest position is that neither we nor any reader can verify it inside the timeframe it describes, and Adam’s has not published data supporting it. Treat it as a marketing position rather than a specification, and buy the product for the kit rather than for the number.

Who should buy which

  • First coating, dark paint, want as much help as possible: Adam's, for the surface prep in the box and the UV tracing option.
  • Have coated before, want to know what you are buying: CarPro, for the published silica figure and consumption rate.
  • Coating a car in a cold garage: CarPro, because it is the only one of the two that publishes an application temperature window.
  • Coating more than one vehicle: CarPro, because you can work out how far a bottle goes before you buy it.
  • Want the biggest number on the label: Adam's, with the caveat above.

What neither one tells you

Neither publishes a coverage figure in square feet. Neither publishes an independent test result. Neither publishes what happens at year three, which is the year that decides whether either claim was worth paying for. That is not unique to these two — it is the state of the whole category, documented across the main coating roundup.

What decides your result more than either bottle is the preparation underneath it. Both coatings bond to bare, decontaminated, oil-free clear coat and to nothing else. If you have not done chemical decontamination and a panel wipe, the difference between these two products is irrelevant, because neither will reach its claim.

Every pick, with the working

Each entry lists the specifications the maker publishes, the axis scores those specifications produce, and what you give up. Rows that read “Not published” are not omissions on our side: they are figures the maker will not commit to in writing, and they cost the product points on the transparency axis.

Our pickThe only coating here that publishes its SiO2 percentage

CarPro CQUARTZ UK 3.0

CarPro

6.1/10

CarPro publishes 70% SiO2 at 99.9% purity, a 2 to 5 year durability range, a 10ml-per-coat consumption figure and a 40F to 90F application window. That is four hard numbers on one page, and it is four more than most of this category manages. Buy it because it is checkable, not because 70% is magic.

Sizes
10ml / 30ml / 50ml / 100ml
SiO2 content
70% SiO2, 99.9% purity
Claimed durability
2 to 5 years
Published consumption
10ml per coat
Application temperature
40F to 90F
In the box
30ml bottle, 4 suede applicators, block, leveling towel
Cure time
Not published
Warranty
Not published

What it does well

  • 70% SiO2 at 99.9% purity, published by CarPro on the product page
  • Application window published as 40F to 90F, which is the figure that decides whether your garage works in November
  • 10ml per coat published, so a 30ml bottle is roughly three coats and the arithmetic is yours to do
  • Kit includes suede applicators, a block and a leveling towel rather than just the bottle

Who it is not for

  • The durability claim is a three-year-wide range, which is a wide range to plan around
  • No cure-time figure published beyond the 2-5 minute buffing window
  • Leveling is unforgiving compared with a spray coating; this is not the coating to learn on
How this score was calculated
Protection claim4.0/10, weight 20%
CarPro claims 24 months, scored against the 60-month ceiling this category tops out at. That is the manufacturer's claim reported here, not a durability figure anyone measured for us.
Published SiO2 content8.3/10, weight 22%
70%, scored on a band running from 20 to 80. Published by CarPro.
Cost per ounce4.4/10, weight 16%
$59.99 for 1.01 oz works out at $59.40 an ounce, scored against a band of $20.00 (good) to $90.00 (expensive) for a ceramic coating.
Price against the ceiling6.0/10, weight 14%
A listed $59.99 against the $150 one upgrade in this category realistically tops out at. A list price captured on the compile date, not a live price and not what you will pay.
Written commitmentdropped
CarPro publishes no warranty term on this product's own page, so the axis is dropped. On a tool that is worth noticing, and it costs the product points on transparency instead.
Spec transparency7.5/10, weight 18%
6 of the 8 specifications we went looking for are published by CarPro. Every blank row below is something the maker will not put in writing, and it costs the product points here.

List price $59.99 per CarPro's US store, 30ml kit, captured on the compile date below. Not a live price and not what you will pay — the button is where the real number is.

Specifications from CarPro's CQUARTZ UK 3.0 listing, compiled September 8, 2026.

2The biggest claim on the page, and the fullest kit

Adam's Graphene Ceramic Coating

Adam's Polishes

6.0/10

Skip this one. A 7+ year claim on a DIY coating is the kind of number that is impossible to falsify inside the warranty period and impossible to verify outside it. If the claim is what is selling you, buy the coating that publishes a coverage figure instead.

Adam's publishes 7+ years of protection and >10H hardness on a 60ml bottle at $119.99, in a kit that includes surface prep, a booster, applicators, towels and gloves. The claim is the largest in this ledger by a factor of two, and Adam's publishes no coverage figure to go with it, so you cannot work out how many cars the bottle does.

Size
60ml
Claimed durability
7+ years
Claimed hardness
Greater than 10H
Cure time
24 hours free from water and weather
In the box
60ml coating, 4oz Graphene Boost, 4oz Surface Prep, 4 towels, 2 applicators, gloves
Published coverage
Not published
SiO2 content
Not published
Warranty
Not published

What it does well

  • 7+ years claimed, the longest figure any maker in this ledger publishes
  • Kit is genuinely complete: 4oz Surface Prep, 4oz Graphene Boost, applicators, suede and soft towels, gloves
  • 24-hour cure window published plainly on the page
  • A UV tracing feature is offered so you can see where you have already coated

Who it is not for

  • No coverage or consumption figure published, so cost per car is not calculable from Adam's own numbers
  • No SiO2 or graphene percentage published; >10H hardness is a claim, not a number you can check
  • $119.99 is the highest list price here and the bottle is 60ml
How this score was calculated
Protection claim10.0/10, weight 20%
Adam's Polishes claims 84 months, scored against the 60-month ceiling this category tops out at. That is the manufacturer's claim reported here, not a durability figure anyone measured for us.
Capabilitydropped
Adam's Polishes does not publish a figure for published sio2 content on this product, so the axis is dropped and the remaining weights are re-normalized.
Cost per ounce4.4/10, weight 16%
$119.99 for 2.03 oz works out at $59.11 an ounce, scored against a band of $20.00 (good) to $90.00 (expensive) for a ceramic coating.
Price against the ceiling2.0/10, weight 14%
A listed $119.99 against the $150 one upgrade in this category realistically tops out at. A list price captured on the compile date, not a live price and not what you will pay.
Written commitmentdropped
Adam's Polishes publishes no warranty term on this product's own page, so the axis is dropped. On a tool that is worth noticing, and it costs the product points on transparency instead.
Spec transparency6.3/10, weight 18%
5 of the 8 specifications we went looking for are published by Adam's Polishes. Every blank row below is something the maker will not put in writing, and it costs the product points here.

List price $119.99 per Adam's Polishes' own store, captured on the compile date below. Not a live price and not what you will pay — the button is where the real number is.

Specifications from Adam's Graphene Ceramic Coating product page, compiled September 8, 2026.

No live price is currently verified, so every button here reads Check price rather than a number we cannot stand behind. Why we do it that way.

Questions people actually ask

+Is graphene better than ceramic?
Graphene coatings are ceramic coatings with graphene oxide added. The claimed advantages are around water spotting and heat, and no maker publishes comparative data. It is a formulation difference, not a different class of product.
+Which lasts longer in practice?
Unknown, and neither we nor the manufacturers have published data that would settle it. Adam’s claims 7+ years and CarPro claims 2 to 5. Both figures assume careful washing and correct application.
+Do I need the UV flashlight?
It helps most on black and dark paint, where high spots are hardest to see and most visible once cured. On light or metallic paint a single handheld inspection light at a low angle does the same job.
+Can I apply either coating outside?
CarPro publishes 40F to 90F, so you can plan around it. Adam’s publishes no temperature window. In both cases the real outdoor problem is dust settling on a curing coating.

Where these figures came from

Every figure on this page is a published manufacturer or authorized-retailer claim, not a measurement we made. How we research explains exactly what we did and did not do.

Read next

More from Ceramic Coatings and Protection

Every page in Ceramic Coatings and Protection

Or start with how we research, which explains what every number on this site is and is not.